|
RING 4012PLM+ Specification
|
|
PRINT METHOD
|
*Thermal Transfer/Direct Thermal
*Harmonic(History Control Print Head)
|
|
DOT RESOLUTION
|
300 dpi/ 11.8 dot per mm
|
|
PRINT SPEED
|
1"- 6"/sec.(15mm - 152mm/sec.)
|
|
PRINT WIDTH
|
4.17"/106mm
|
|
PRINT LENGTH
|
27.5"/700mm
|
|
MEMORY
|
*8MB SDRAM
|
|
MEDIA TYPE
|
*Die cut labels
*Butt cut Labels tags
*Tag stock
*Roll stock(Continuous s/o die cuts)
*Fan Fold
|
|
MEDIA WIDTH
|
*4.5"/116mm
|
|
MEDIA THICKNESS
|
*0.0025" to 0.01"/0.0635mm to 0.254mm
|
|
SUPPLY ROLL CAPACITY
|
*8"/203mm maximum diameter
|
|
RIBBON ROLL CAPACITY
|
*2.95"/75mm maximum diameter
|
|
CABINET
|
*All steel cabinet
|
|
LCD DISPLAY
|
*2 lines by 8 characters(Alpha/Numeric)
*Back Light
|
|
SENSORS
|
*Ribbon sensor (Reflective method)
*Label sensor(Transmit method)
*Media Home position sensor
(Transmit-Auto calibration method)
|
|
ERROR INDICATORS
|
*Label/Ribbon empty
*Head open
*Communication
*Grammatical
*Parameter
(Each error is notified by buzzer and LCD
|
|
BAR CODE
|
*Code39, Code93, Code128, NW7, 2 of 5(Industrial, Matrix and Interleaved), EAN-JAN 13/8, UPC-A/E, EAN128, QR Code,PDF417, Data Matrix, Maxi Code, RSS
|
|
FONTS-CHARACTER SIZE IN DOTS
|
*8 character sets(Alpha/Numeric and symbols)8x8, 12x12, 16x16, 16x24, 24x24, 24x26, 32x40, 48x60
Expansion is 1-10 and 16 times
(Both directions)
*5-OCRB character sets(4 Numeric and 1 Alpha/Numeric)
Numeric-16x18, 24x27, 32x36 and 40x45
Alpha/Numeric-32x32
NOTE : Should not expand
Scalable Smooth Fonts,32-720 Dot width, 32-720 Dot length
Italic Slant Programmable 10, 15 and 20 degrees. NOTE : 8-31 Dots printing is available but must be matched properly with speed and media
*Down loadable font
|
|
PRINTING MODES & FUNCTIONS
|
*Peel off, Tear off(demand type)with label back feed for top of label printing.
*Batch printing(Stip-for continous printing of labels. Can be used with optional External Rewinder)
*Butt cut label printing(Requires optional back side mark sensor)
|
|
PROGRAMMING LANGUAGE FEATURES
|
*Advanced Label marking language-ALL
*ALL commmand are all ASCII characters. This allows flexibility with many environments and platforms
*Easy to program and format printing areas
*Pixel programming allows expanded area of up to 4 times
Four direction print rotation(0,90,180 & 270 degrees)
Reverse print and area fill in
*Mirror print
*Half Tones
*Lines, dotted lines, angle lines and boxes
Bit image data transfer and printing
*Downloadable graphics, text, font and formats to optional memory card
*Character Set(Code page)table
*Serializing(Numeric)
*Communication and print functions
*RLE data compression
*Graphic supported AIM, AIX, BMP, PCX(Monochrome only)
|
|
ADJUSTABLE PRINT FUNCTIONS SELECTABLE TROUGH FRONT PANEL OR BY SOFTWARE
|
*Print Speed/Energy Settings
*Print Density
*Label Print Position
*Cutting Position
*Thermal Transfer/Direct Thremal
*Test Printing
*Ready/Pause
|
|
COMMUNICATION INTERFACE-SELECTABLE THROUGHT FRONT PANELL OR BY SOFTWARE
|
*Parallel/USB(User select)
*RS232/to 115,200 baud rate, Line Control-RS-CS, XON-XOFF, ER-DR, Stop Bits, Parity, Data length
|
|
POWER SOURECE
|
Multiple Power supply, Industrial standard, 115 volts +-10% AC50/60 HZ, 240 volts +-10% AC 50/60 HZ, Built to UL/CSA safety standard and FCC emissions standards.
|
|
ENVIRONMENTAL
|
*Operating temperature 41 to 104 fahrenheit /5 to 40 Centigrade
*Relative humidity below 85% Non-condensing
*Ventilation : Air Movement
*Dust:Non-Conducting, Non-Corrosive
|
|
OPTIONS
|
*Cutter(Slide type)
*Cutter(Non stop rotary type)
*External Label Stocker
*8MB Flash memory
*LAN interface 100 Base-TX/10 Base-T(TCP/IP Protocol)
|
|
SOFTWARE
|
*BarTender Ultra Lite Plus
*Windows Drivers
|
|
DIMENSIONS
|
*8.9"W x 11.8"H x 10.25"D(225mmW x 300mmH x 260mmD)
|
|
WEIGHT
|
*20lb/9kg
|
