Thermal Printers Product Catalog ,Seiko Instruments Inc. PRODUCT LINEUP (Standard Products)
Thermal Printers
Product Catalog
Seiko Instruments Inc.
Contents
PRODUCT LINEUP (Standard Products) .................................................................... 1
LTP2000 Series Printers .............................................................................................. 2
ACU2000 Series Auto Cutters ..................................................................................... 3
LTP1245 Printer ........................................................................................................... 4
Interface Boards & CPUs ............................................................................................ 5
LTP Series Printers ..................................................................................................... 6
Auto Cutter & Winder Unit .......................................................................................... 7
LTP Series Printers ..................................................................................................... 8
Interface Boards & CPUs ............................................................................................ 9
LTP3000 Series Printers ............................................................................................ 10
LTP3000 Series Interface Boards & CPUs ............................................................... 11
LTP5000 Series Printers & Interface ........................................................................ 12
Auto Cutters & CPU ................................................................................................... 13
STP Series printers ................................................................................................... 14
MTP Series Printers ................................................................................................... 15
Interface ..................................................................................................................... 16
DPU-3372 Printer Units ............................................................................................. 17
DPU-5000 Series Printer Units .................................................................................. 18
DPU-3245 Printer Units ............................................................................................. 19
DPU Series Printer Units (Stand-alone type) ........................................................... 20
DPU Series Printer Units (Panel-mount type) .......................................................... 21
Printer Mechanism Specifications List .................................................................... 22
DPU Series Specifications List ................................................................................. 24
1
Seiko Instruments Inc. provides customers four series of thermal printers - namely LTP, STP, MTP and DPU (unit-type) in response to individual
customer needs.
PRODUCT LINEUP (Standard Products)
* The IF4112-GCB is a specified interface board used only for the STP411-320 that can print international
characters.
* The M50747-500SP is a specified CPU used only for the STP411-320.
* Some models of the DPU-5300/5400 and the DPU-3372 are equipped with an auto cutter.
* The DPU3372 is available in two colors, gray and ivory.
The MTP is a series of very compact thermal serial printers developed
in response to small-size and low-price requirements. It is available
in the following types according to the paper width to be used.
The LTP3000 is a series of compact, lightweight and battery-powered
thermal line printers. It can print high-resolution (8 dots/mm) kanji
characters.
The STP Series is an upper version of the MTP series. The use of the
stepping motor allows noise to be drastically reduced and ensures
high print quality. Bidirectional character print and logical seek print
are available by data input via interface.
The LTP5000 is an enhanced series of high-speed (50mm/sec) and
high-density (8 dots/mm) thermal line printers. Each and every
LTP5000 is equipped with an auto cutter.
The LTP Series is a series of thermal line printers featuring highspeed
and superb durability as POS/ECR printers. Options including
an auto cutter and a winder unit are also available in response to the
diversified market needs.
The DPU is a series of thermal printers incorporating a printer
mechanism and an interface board. It is suited for printing data
transmitted from a host system such as measuring instruments.
The LTP2000 is a series of high-performance thermal line printers
with a printing speed of as fast as 90mm/sec (LTP2242) and 75mm/
sec (LTP2342, 2442) and the head life of as long as one hundred
million pulses or 50km minimum. A full line of options including a
drive interface, CPU, and auto cutter are also available to meet various
needs.
The LTP1245 is a super compact, lightweight thermal line printer
powered by lithium-ion batteries. Capable of printing at a max. speed
of as fast as 62.5mm/sec and easy-to-use as well, it is especially suited
for use with various kinds of portable compact devices.
Paper width
LTP2000 series
Compatible interface
Compatible CPU
Compatible auto cutter
60mm 80mm 112mm
LTP2242 LTP2342 LTP2442
IF2201-01B
PT221P01
ACU2224 ACU2324 ACU2424
Paper width 58mm
Model
Compatible interface
Compatible CPU
IF1001-01B
PT100P01
LTP1245
Paper width
LTP3000 series
Compatible interface
Compatible CPU
LTP3245A/B LTP3245F/G LTP3345 LTP3445
58mm 80mm 112mm
IF3001 -01B _____ IF3002 -01B
PT300P01 PT303P01 PT301P01
PT303P01
PT304P02
_____
LTP series
Paper width 58mm
Compatible interface
Compatible CPU
LTP256
CAP256
IF2001-01B
PT201P01
Compatible auto cutter
Compatible winder unit
ACU5224A
_____
LTP4242
IF4001-01B
PT400P02
ACU1224A/D
WU280
LTP7242
_____
_____
ACU1224B/E
WU280
Paper width
LTP5242
LTP5246 LTP5347
LTP5437
LTP5442
LTP5446
LTP5000 series
Compatible interface IF5003-02B
Compatible CPU PT502P02
Compatible auto cutter ACU5224A
ACU5212A
ACU5324A ACU5424A
ACU5412A
60mm 80mm 112mm
Paper width 58mm 80mm 112mm
STP series
STP211-144
STP211-192
STP312-256 STP411-256
STP411-320
Compatible interface IF0121-GCB IF0121-GCB IF0121-GCB
IF4112-GCB*
Compatible CPU M50747-753SP M50747-753SP
M50747-753SP
M50747-500SP*
Paper width 38mm 58mm 80mm
MTP series
Character
printer
Graphics
printer
Compatible interface
Compatible CPU
MTP102-13B
MTP102-16B
MTP201-20B
MTP201-24B
MTP401-40B
_____ MTP201-G128
MTP201-G166
MTP401-G256
MTP401-G280
IFM001-01B
IFM001-01BM
HD6433238R42P/43F
Paper width 38mm 58mm 80mm 112mm
DPU series printer unit
(Panel-mount type)
DPU series printer unit
(Stand-alone printer type)
DPU-10-13CF
DPU-10-16CF
DPU-10-20CF
DPU-20-20CF
DPU-20-24CF
_____ _____
_____
DPU-201G
DPU-201GS
DPU-3245
DPU-3372*
DPU-5300*
DPU-414
DPU-5400*
2
LTP2000 Series Printers
The LTP2000 is a series of high-performance thermal line printers
boasting high-speed print of a maximum of 90mm/sec (LTP2242)
and 75mm/sec (LTP2342, 2442) and durability of the head life of
one hundred million pulses or 50km. It meets three types of paper
width together with a full line of options including a drive CPU,
interface board and auto cutter to meet various needs.
FEATURES
• High speed print of 90mm/sec max. (LTP2242) and 75mm/sec
max. (LTP2342, 2442).
• Superbly durable head life of 100 million pulses or 50km.
• Two ways to insert the paper, straight and curl (also prints on
thick paper).
• Also prints on two-ply thermal and label paper.
• Automatically loads paper via the paper sensor.
• The measure to counter static electricity minimizes the secondary
discharge.
• The head open mechanism allows for easy maintenance.
APPLICATIONS
Measuring
instrument
LTP2242
LTP2342
LTP2442
Model
Print system
Head up/down detection
Paper detection
Dot resolution (dots/mm)
Dot configuration (dots/line)
Printing speed (mm/sec.) (max.)
Printing width/Paper width (mm)
LTP2242
432
90
54 / 60
85.2 x 61.4 x 27
Approx. 115
LTP2342
Thermal line dot system
Detection by mechanical switch
Detection by photo interrupter
8
576
75
72 / 80
108 pulses
50 km
5 ± 0.25
24 ± 2.4
106.4 x 61.4 x 27
Approx. 135
LTP2442
832
75
104 / 112
138.2 x 61.4 x 27
Approx. 160
Thermal head
service life
Anti-pulse characteristic
Abrasive resistance
Logic
Head
Dimensions (W x D x H)(mm)
Weight (g)
Operating
voltage range(V)
External appearance
Medical
equipment
Bar code Label
paper
Ticket
printer
3
ACU2000 Series Auto Cutters
Model
Cut method
Cut width (mm)
Paper thickness (μm)
Cut condition
Starting current (A)
Operation time (msec. / cycle) (max.)
Cut frequency (cuts / minute) (max.)
Life (cuts)
Dimentions (W x D x H) (mm)
Weight (g)
ACU2224A
63
79 x 66.5 x 16.5
Approx. 120
ACU2324A
Guillotine type
85
65 to 125
Full or partial cut (leaving one-point, 2mm wide)
24 ± 2.4
5 ± 0.25
1.2 max.
500
30
300,000
100 x 66.5 x 17
Approx. 200
Drive
Voltage (V)
Motor
Detector(Control switch)
ACU2424A
116
126 x 69.3 x 17.5
Approx. 260
External appearance
ACU2224A ACU2424A
ACU2324A
The ACU2000 Series Auto Cutter is a cutter developed for the
LTP2000 Series thermal line printer mechanism. Full or partial paper
cut is available by command input. It can cut thick paper with a
thickness of up to 125mm. Designed to be slim (16.5 to 17.5mm high),
this cutter can be easily mounted on the LTP2000 Series using a
specified attachment, allowing for easy maintenance.
FEATURES
• Full or partial paper cut is available by command input.
• Can cut up to 125mm thick paper.
• Designed to be as slim as 16.5 to 17.5mm high.
• Can be easily mounted using a specified attachment.
• After having been mounted, the cutter can be easily opened,
allowing for easy maintenance.
• A wide variety of models in response to each and every mechanism
of the LTP2000 Series.
4
LTP1245 Printer
The LTP1245 is a super compact, lightweight thermal line printer
especially suited for use with small portable devices such as PDA
(Personal Digital Assistant) and hand-held terminal. It prints as fast
as 62.5mm/sec. max., and is powered by lithium-ion batteries. It is
also equipped with functions allowing for various operating situations
and can be easily handled.
FEATURES
• Super compact (72 W x 39.5 D x 16 H mm) and super lightweight
(45g).
• Very long head life of 100 million pulses or 50km.
• Max. printing speed:
500 dot lines/sec (62.5mm/sec) during 8.0V drive.
450 dot lines/sec (56.25mm/sec) during 7.2V drive.
• Also powered by lithium-ion batteries.
• Prints on two-ply thermal, label, and thick paper.
• Two ways to insert the paper, straight pass and curl pass.
• Can automatically load paper via the paper sensor.
• Opening/closing the head open lever allows the head to be easily
cleaned.
APPLICATIONS
PDA
Model
Print system
Head up/down detection
Paper detection
Dot resolution (dots / mm)
Dot configuration (dots / line)
Printing speed (mm / sec) (max.)
Printing width/Paper width (mm)
Dimensions (W x D x H) (mm)
Weight (g)
LTP1245
Thermal line dot system
Detection by photo interrupter
Detection by photo interrupter
8
384
62.5 (during 8.0V drive)
48 / 58
108 pulses
50 km
4.5 to 5.5
4.2 to 8.5
72 x 39.5 x 16
Approx. 45
Thermal head
service life
Anti-pulse characteristic
Abration resistance
Operating
voltage range(V)
Logic
Head
External appearance
Hand-held
terminal
EFT/POS Measuring
instrument
Mobile
CARD
5
PT221P01
The PT221P01 is a CPU used to drive the LTP2000 series printers.
By using it with a gate array (PT301GA1) as a pair, a drive board with
the same full functions as the IF2201 can be created as desired.
FEATURES
• Prints with less current using division control in accordance with the number
of dots to be activated.
• Supports both serial and parallel input.
• Ensures high-quality print by measuring the temperature and voltage, and
automatically adjusting the print density.
• The bar code print function allows bar codes to be easily printed.
(CODE39, UPC, JAN, ITF, CODABAR)
• Provides a wide variety of character functions including double-width/
double-height, reverse print, inverse print, underlining, rotation character,
and character spacing control.
• Prints on two-ply thermal and label paper.
• Controls the ACU2000 series auto cutter.
PT100P01
The PT100P01 is a CPU used specifically for the LTP1245. By using
it with a gate array (PT500GA1) as a pair, a drive board with the
same full functions as an interface board can be created as desired.
FEATURES
• Prints with less current using division control in accordance with the
number of dots to be activated.
• Supports both serial and parallel input.
• Ensures high-quality print by measuring the temperature and voltage, and
automatically adjusting the print density.
• Provides a wide variety of character functions including double-width/
double-height, reverse print, inverse print, rotation character, and character
spacing control.
• Superimposes characters and bit image data.
• Provides a ruler line function which enables ruler lines and characters to
be easily superimposed.
• Prints on two-ply thermal and label paper.
Model
CPU
Operating voltage range (V)
Character matrix (H x W) (dots)
Character type
Input method
Dimensions (W x D x H) (mm)
16-dot characters
16 x 8
24-dot characters
24 x 12
Extended graphic character set
Simplified Centronics,RS-232C (TTL level)
100 x 90 x 22
Vp : 24 ± 2.4 Vcc : 5 ± 0.25
IF2201-01B
PT221P01
Model
CPU
Operating voltage range (V)
Character matrix (H x W) (dots)
Half-size characters
Full-size characters
Character type
Input method
Dimensions (W x D x H) (mm)
IF1001-01B
PT100P01
16-dot characters
16 x 8
24-dot characters
24 x 12
Vp : 4.2 to 8.5 Vcc : 4.5 to 5.5
Extended graphics character se
Simplified Centronics, RS-232-C (TTL level)
70.0 x 100.0 x 12.0
Model number
Package form
Dimensions (W x D x H) (mm)
Configuration
Input method
Applied mechanism
Character type
Line spacing
Character spacing
Operating voltage(Vcc) (V)
Operating frequency (MHz)
Remark
PT221P01
80-pin flat package
22.8 x 16.8 x 3.05
C-MOS LSI
8-bit parallel (Centronics), asynchronous serial
LTP2242, 2342, 2442
Extended graphics character set
16-dot line space (can be changed via a command)
4-dot space (Half-size) (can be changed via a command)
8-dot space (Full-size) (can be changed via a command)
5.0 ± 0.5
25 ± 0.125
Use together with a gate array (PT301GA1) as a pair.
Model number
Package form
Dimensions (W x D x H) (mm)
Configuration
Input method
Applied mechanism
Character type
Line spacing
Character spacing
Operating voltage (V)
Operating frequancy (MHz)
Remark
PT100P01
80-pin flat package
22.8 x 16.8 x 3.05
C-MOS LSI
8-bit parallel (Centronics)
Asynchronous serial
LTP1245
Extended graphics character set.
16-dot line space(can be changed via a command)
4-dot space (Half-size) (can be changed via a command)
8-dot space (Full-size) (can be changed via a command)
5.0 ± 0.5
16 ± 0.08
Use together with a gate array (PT500GA1) as a pair.
Interface Boards & CPUs
IF1001-01B
The IF1001-01B is an interface board used to drive the LTP1245
series printer mechanism. It is equipped with serial and parallel data
input terminals. The IF1001-01B brings its printing functions into
full play using a wide variety of characters and function commands.
It easily implements high-quality print by measuring the head resistive
value, temperature, and voltage for automatic adjustment of the print
density.
IF2201-01B
The IF2201-01B is a drive interface board used specifically for the
LTP2000 series printers. It is equipped with serial and parallel data
input terminals. The IF2201-01B brings its printing functions into
full play including bar codes using a wide variety of characters and
function commands. Also supporting control of the ACU2000 series
auto cutter, it can easily use the functions of the LTP2000 series.
6
LTP7242
Thermal line dot system
Detection by mechanical switch
Detection by photo interrupter
8
432
100 (800 dotlines / sec.)
54 / 58
1 x 10 8 pulses (print rate =12.5%)
100 km
5 ± 0.5
24 ± 2.4
88.0 x 73.0 x 36.3
Approx. 210
Model
Print system
Head up/down detection
Paper detection
Dot resolution (dots / mm)
Dot configuration (dots / line)
Printing speed (mm / sec.) (max.)
Printing width/Paper width (mm)
Dimensions (W x D x H) (mm)
Weight (g)
Anti-pulse characteristic
Abrasion resistance
Logic
Head
LTP4242
Thermal line dot system
Detection by mechanical switch
Detection by photo interrupter
8
432
70 (560 dotlines / sec.)
54 / 58
5 x 10 7 pulses
30 km
5 ± 0.5
24 ± 2.4
86.5 x 52.0 x 22.0
Approx. 150
Thermal head
service life
Operating
voltage range (V)
External appearance
LTP4242
The LTP4242 is a new, compact, high-speed, and high-cost
performance thermal line printer. Its application ranges from POS/
ECR systems to measuring instruments, analyzers,communications
systems and data terminals. It features high operationability for POS
systems such as easy paper insertion, quick head cleaning and
replacement. A new static electricity protection system is installed.
FEATURES
• Maximum printing speed (70 mm/sec)
• The head attach/detachment mechanism ensures easy head cleaning
and replacement.
• Connecting the printer fixture to the frame ground allows for all
metallic parts to be connected to the frame ground, preventing
damage occurring due to static electricity.
• Compact (86.5 W x 52 .0 D x 22.0 H mm) and lightweight (150 g)
• High-resolution print (8 dots/mm)
• Loads paper via the paper sensor.
LTP4242 LTP7242
* Drive interface board and CPU are also available (LTP 4242 only)
LTP Series Printers
APPLICATIONS
POS/ECR EFT/POS
LTP7242
The LTP7242 is a newly developed thermal line printer for POS
systems. It features ultra high- speed, superb-durability, enhances
conventional performance and responds to heavy-duty demand for
POS systems.
FEATURES
• Maximum print speed (100 mm/sec)
• Superb durability (100 km/10 million pulses)
• An auto cutter can be mounted.
• Uniquely-developed head support mechanism allows for easy head
cleaning.
CARD
7
Auto Cutter & Winder Unit
ACU1224 Auto Cutter
The ACU1224 is an auto cutter used specifically for the LTP4242
and LTP7242 printer mechanisms. It can select 1-point or 3-point
remaining cut as a POS/ECR receipt printer cutter, and performs highspeed
continuous cut of 30 cuts/minute max. It can be easily mounted
on the printer mechanism using a specified attachment.
WU280 Winder Unit
The WU280 is a roll paper winder unit used specifically for the
LTP4242 and LTP7242 printer mechanisms. Powered by the printer
mechanism, it requires no drive motor and control circuit enabling
design of its compact body.
Model
Cut method
Cut width (mm)
Paper thickness (μm)
Cut condition
Starting current (A)
Operating time (msec. / cycle)
Cut frequency (cuts / min.)
Life (cuts)
Dimensions (W x D x H) (mm)
Weight (g)
ACU1224
Guillotine type
60
65 to 95
Leaving one-point or three-point
24 ± 2.4
5 ± 0.25
1.2 max.
500 max.
30 max.
300,000
70.0 x 55.0 x 22.0
Approx. 150
Drive
voltage(V)
Motor
Detector(Control switch)
Model
Paper width (mm)
Paper thickness (μm)
Outside dia. of paper roll (mm)
Inside dia. of paper roll (mm)
Life (km)
Dimensions (W x D x H) (mm)
Weight (g)
WU280
58
70 to 80
Max. ø 83
Min. ø 20
100
91 x 92 x 97.6
Approx. 111
8
Model
Print system
Head up/down detection
Paper detection
Dot resolution (dots / mm)
Dot configuration (dots / line)
Printing speed (mm / sec.) (Max.)
Printing width/Paper width (mm)
Dimensions (W x D x H) (mm)
Weight (g)
LTP256
Thermal line dot system
Detection by mechanical switch(Option)
Detection by photo interrupter
4
192
70 (280 dotlines / sec.), 55 (220 dotlines / sec.)
48 / 58
5 x 107 pulses
30 km
4.75 to 5.25
23.0 to 25.0
80.0 x 62.0 x 41.0
Approx. 170
CAP256
Thermal line dot system
Detection by mechanical switch
Detection by photo interrupter
4
192
70(280 dotlines/sec.), 55(220 dotlines/sec.)
48/58
5 x 107 pulses
30 km
4.75 to 5.25
23.0 to 25.0
84.0 x 73.0 x 70.0
Approx. 330
Anti-pulse characteristic
Abration resistance
Logic
Head
Thermal head
service life
Operating
voltage range(V)
External appearance
LTP Series Printers
LTP256
The LTP256 is a high-cost performance, high-speed thermal line
printer. It can print on 58-mm paper. The LTP256 features 4 dots/
mm resolution, sufficient enough to print ANK characters and a
maximum printing speed of 70 mm/sec. The LTP256 employs a new
mechanism, allowing the thermal head unit to be easily attached/
detached for easy maintenance. The LTP 256 is equipped with a
photo interrupter for paper detection. A mechanical switch for headup
detection is optionally offered. Only curl-pass paper insertion is
available.
FEATURES
• Maximum printing speed for 280 dot lines/sec (70 mm/sec.)
• Compact (80.0 W x 62.0 D x 41.0 H mm)
• Easy thermal head unit attach/detachment and easy
maintenance
LTP256 CAP256
APPLICATIONS
POS/ECR Ticket
printer
Measuring
instrument
CAP256
The CAP256 is a version of the LTP256 on which the auto cutter
ACU5224 is mounted using a specified attachment.
FEATURES
• Maximum printing speed for 280 dot lines/sec (70 mm/sec)
• Both full and partial paper cut are available.
• A one-touch open mechanism allows for easy maintenance and
removes quickly paper jam or other problems.
9
Interface Boards & CPUs
PT201P01
The PT201P01 is a CPU
used specifically for the
LTP256 and CAP256.
Using this CPU, a drive
board with the same full
functions as an interface
board can be created as
desired.
Model
CPU
Operating voltage range (V)
Character matrix (H x W) (dots)
CHaracter type
Input method
Dimensions (W x D x H) (mm)
IF2001-01B
PT201P01
9 x 8
Vp : 24 ± 1.0 Vcc : 5 ± 0.25
Alphanumeric
Extended graphic character set
Simplified Centronics, RS-232C (TTL level)
80.0 x 110.0 x 20.0
FEATURES
• Prints with less current using division
control in accordance with the
number of dots to be activated.
• Supports both parallel and serial
input.
• Ensures high-quality print by
automatically adjusting the print
density according to the temperature
and voltage.
• Provides error detection functions for
voltage, temperature, paper empty,
and head up.
• Provides character functions
including double-width/doubleheight,
reverse print, and inverse
print.
• An auto loading function allows the
paper to be easily inserted.
•Controls the special auto cutter. Model number
Package form
Dimensions (W x D x H) (mm)
Configuration
Input method
Applied mechanism
Character type
Line spacing
Character spacing
Operating voltage (V)
Operating frequency (MHz)
Remark
PT400P02
80-pin flat package
22.8 x 16.8 x 3.05
C-MOS LSI
8-bit parallel (Centronics)
asynchromous serial
LTP4242
Extended graphics character set
16-dot line space (can be changed via a command)
4-dot space (Half-size) (can be changed via a command)
8-dot space (Full-size) (can be changed via a command)
4.5 to 5.5
20 ± 0.5%
Use together with a gate array (PT500GA1) as a pair.
Model number
Package form
Dimensions (W x D x H) (mm)
Configuration
Input method
Applied mechanism
Character type
Line spacing
Character spacing
Operating voltage (V)
Operating frequency (MHz)
PT201P01
64-pin flat package
18.7 x 24.7 x 3.35
C-MOS LSI
8-bit parallel (Centronics)
Asynchronous serial
LTP256, CAP256
Alphanumeric
Extended graphics character set
3-dot line space
0-dot space
5.0 ± 0.25
10 ± 0.5%
• Prints with less current using
division control in accordance with
the number of dots to be activated.
• Ensures high-quality print by
measuring the temperature and
voltage, and automatically
adjusting the print density.
• Provides a wide variety of character
functions including double-width/
double-height, reverse print,
inverse print, underlining, and
character spacing control.
• An option font function allows a
font of a desired size under 127 x
127 to be stored and printed.
• An auto loading function allows the
paper to be easily inserted.
Model
CPU
Operationg voltage range (V)
Character matrix (H x W) (dots)
Half-size character
Full-size character
Character type
Input method
Dimensions (W x D x H) (mm)
IF4001-01B
PT400P02
Vp : 24 ± 2.4
16-dot characters
16 x 8
Vcc : 5 ± 0.5
24-dot characters
24 x 12
Extended graphics character set
Downloaded characters, external characters, option fonts
Simplified Centronics, RS-232C (TTL level)
90.0 x 100.0 x 22.0
IF4001-01B
The IF4001-01B is a drive interface board used specifically for the
LTP4242 printer. It is equipped with serial and parallel data input
terminals. The IF4001-01B brings its printing functions into full play
using a wide variety of characters and function commands. Also
supporting an auto loading function and control of the auto cutter
(ACU1000), it can easily use the functions of the LTP4242 printer.
IF2001-01B
The IF2001-01B is an interface board used to drive the LTP256 and
CAP256 printers.
It responds to 8-bit parallel and serial input (TTL level). It is also
equipped with a paper auto loading function and a special auto cutter
control function.
PT400P02
The PT400P02 is a CPU used
to drive the LTP4242 printer.
By using it with a gate array
(PT500GA1) as a pair, a
drive board with the same full
functions as the IF4001 can
be created as desired.
Capable of driving two
printer mechanisms, this onechip
CPU allows the size of
the board to be reduced.
FEATURES
•Capable of driving two
printer mechanisms.
•Supports both serial and
parallel input.
10
LTP3000 Series Printers
LTP3245A/B
LTP3245F/G
LTP3345
LTP3445
LTP3345
FEATURES
• Paper width of 80mm.
• Also powered by nickel hydrogen batteries.
• Maximum printing speed (360 dot lines/sec = 45mm/sec) when
operating on 7V.
• Prints on two-ply thermal and label paper.
• Automatically loads paper via the paper sensor.
The LTP3000 is a series of compact and lightweight thermal line printer mechanisms. It is available in three types of paper width, 2
inches (58mm), 3 inches (80mm), and 4 inches (112mm). It is especially suited for use with various kinds of portable compact devices.
LTP3445
FEATURES
• Paper width of 112mm.
• Also powered by lithium-ion batteries.
• Maximum printing speed (450 dot lines/sec = 56.25mm/sec) when
operating on 8.5V.
• Prints on two-ply thermal and label paper.
• Automatically loads paper via the paper sensor.
LTP3245A/B
FEATURES
• Paper width of 58mm.
• Powered by a 5V single power supply or a battery.
• Maximum printing speed (180 dot lines/sec = 22.5mm/sec).
• Prints on two-ply thermal and label paper.
• Automatically loads paper via the paper sensor.
LTP3245A / B
Thermal line dot system
Detection by mechanical switch
Detection by photo interrupter
8
384
LTP3245F / G
Thermal line dot system
Detection by mechanical switch
Detection by photo interrupter
8
384
Model
Print system
Head up/down detection
Paper detection
Dot resolution (dots / mm)
Dot configuration (dots / line)
Anti-pulse characteristic
Abration resistance
Logic
Head
LTP3345
Thermal line dot system
Detection by mechanical switch
Detection by photo interrupter
8
576
LTP3445
Thermal line dot system
Detection by mechanical switch
Detection by photo interrupter
8
832
56.25 (450 dotlines / sec.) during 8.5V drive
50 (400 dotlines / sec.) during 7.2V drive
45 (360 dotlines / sec.) during 7V drive
104 / 112
5 x 107 pulses
50 km
4.5 to 5.5
4.2 to 8.5
129.0 x 51.0 x 21.0
Approx. 135
72 / 80
5 x 107 pulses
30 km
4.5 to 5.5
4.2 to 7.0
97.0 x 57.0 x 21.0
Approx. 115
54.5 (437 dotlines / sec.)
48 / 58
5 x 107 pulses
30 km
4.2 to 5.5
4.2 to 7.0
76.0 x 54.0 x 21.0
Approx. 105
22.5 (180 dotlines / sec.)
48 / 58
5 x 107 pulses
30 km
4.2 to 5.5
4.2 to 6.0
76.3 x 50.0 x 20.0
Approx. 80
Printin speed (mm / sec.) (max.)
Printing width/Paper width (mm)
Thermal head
service life
Operation
voltage range(V)
Dimensions (W x D x H) (mm)
Weight (g)
APPLICATIONS
PDA
LTP3245F/G
FEATURES
• Paper width of 58mm.
• Powered by a 5V single power supply or batteries.
• Maximum printing speed (437 dot lines/sec = 54.5mm/sec) when
operating on 7V.
• Prints on two-ply thermal and label paper.
• Automatically loads paper via the paper sensor.
Hand-held
terminal
EFT/POS Measuring
instrument
Mobile
CARD
11
IF3001-01B
PT300P01
Vp : 4.2 to 6.0, Vcc : 4.75 to 5.25
IBM compatible characters
Simplified Centronics, RS-232C (TTL level)
IF3002-01B
PT301P01
Vp : 4.2 to 7.0, Vcc : 4.5 to 5.5
Extended graphics character set
Simplified Centronics, RS-232C (TTL level)
Model
CPU
Operation voltage range (V)
Character type
Input method
Dimensions (W x D x H) (mm)
Character matrix (H x W) (dots) 24 x 12 16-dot characters
16 x 8
24-dot characters
24 x 12
67.0 x 75.0 x 20.0 80.0 x 80.0 x 18.0
External appearance
LTP3000 Series Interface Boards & CPUs
CPU (PT300P01, PT301P01, PT303P01, PT304P02) for LTP3000 Series
FEATURES
• Prints with less current using division control in accordance with
the number of dots to be activated.
• Supports both parallel and serial input.
• Ensures high-quality print by measuring the temperature and
voltage, and automatically adjusting the print density.
• Provides a wide variety of character functions including doublewidth/
double-height, reverse print, inverse print, and character
spacing control.
• Superimposes characters and bit image data.
IF3002-01B
• Provides a ruler line function which enables ruler lines and
characters to be superimposed.
• Prints on two-ply thermal paper.
8-bit parallel (Centronics), asynchronous serial
Extended graphics character set
16-dot line space (can be changed via a command)
4-dot space (can be changed via a command)
Use together with a gate array (PT500GA1) as a pair.
Model number
Package form
Dimensions (W x D x H) (mm)
Configuration
Input method
Applied mechanism
Character type
Line spacing
Character spacing
Operating voltage (Vcc)
Operating frequency (MHz)
Remark
PT300P01
64-pin flat package
23.6 x 17.6 x 2.7
C-MOS LSI
LTP3245A/B
5.0 ± 0.5
14.7456 ± 0.5%
PT301P01
80-pin flat package
22.8 x 16.8 x 3.05
C-MOS LSI
LTP3345
5.0 ± 0.5
16 ± 0.5%
PT303P01
80-pin flat package
22.8 x 16.8 x 3.05
C-MOS LSI
LTP3245F / G,LTP3345
5.0 ± 0.5
16 ± 0.5%
PT304P02
80-pin flat package
22.8 x 16.8 x 3.05
C-MOS LSI
LTP3445
5.0 ± 0.5
16 ± 0.5%
IF3001-01B
IF3002-01B
The IF3002-01B is an interface board used specifically for the
LTP3345 printer mechanism. It prints both 16-dot and 24-dot ANK.
Since it automatically measures the head resistance, temperature, and
voltage, adjustment of applied energy is not needed. It is suited for
battery power which requires very little energy to drive the printer,
and can be powered by environmentally-friendly Ni-HM batteries.
IF3001-01B
The IF3001-01B is an interface board used specifically for the
LTP3245A/B. It is equipped with 8-bit parallel and serial RS-232C
data input terminals. The IF3001-01B brings its printing functions
into full play using a wide variety of characters and function
commands. The IF3001-01B also has a function to print on two-ply
thermal paper.
12
Anti-pulse characteristic
Abration resistance
Logic
Head
LTP5242A / B
Thermal line dot system
Detection by mechanical switch
Detection by photo interrupter
8
448
50
56 / 60
5 x 107 pulses
30 km
5 ± 0.25
22.1 to 25.4
105.4 x 59.5 x 36.5
280
LTP5246A / B
Thermal line dot system
Detection by mechanical switch
Detection by photo interrupter
8
448
25
56 / 60
5 x 107 pulses
30 km
5 ± 0.25
11.5 to 12.2
105.4 x 59.5 x 36.5
280
LTP5347A / B
Thermal line dot system
Detection by mechanical switch
Detection by photo interrupter
8
576
50
72 / 80
5 x 107 pulses
30 km
5 ± 0.25
23.1 to 25.1
125.4 x 59.5 x 36.5
320
LTP5442A / B
Thermal line dot system
Detection by mechanical switch
Detection by photo interrupter
8
832
50
104 / 112
5 x 107 pulses
30 km
5 ± 0.25
22.1 to 25.4
157.4 x 59.5 x 36.5
380
LTP5446A / B
Thermal line dot system
Detection by mechanical switch
Detection by photo interrupter
8
832
25
104 / 112
5 x 107 pulses
30 km
5 ± 0.25
11.5 to 12.2
157.4 x 59.5 x 36.5
380
LTP5437A / B
Thermal line dot system
Detection by mechanical switch
Detection by photo interrupter
6
640
50
105.6 / 112
5 x 107 pulses
30 km
5 ± 0.25
22.9 to 24.9
157.4 x 59.5 x 36.5
380
Model
Print system
Head up/down detection
Paper detection
Dot resolution (dots / mm)
Dot configuration (dots / line)
Printing speed (mm / sec.) (max.)
Printing width/Paper width (mm)
Thermal head
service life
Operationg
voltage range (V)
Dimensions (W x D x H) (mm)
Weight (g) (approx.)
External appearance
Model
CPU
Operating voltage range (V)
Character type
Input method
Dimensions (W x D x H) (mm)
Character matrix (H x W) (dots)
IF5003-02B
PT502P02
Vp : 24 ± 1.0, 12 ± 1.0, Vcc : 5 ± 0.25
IBM compatible characters
100.0 x 130.0 x 22.0
24 x 12
24 x 24
48 x 12
48 x 24
Normal size :
Double-width :
Double-height :
Double-width/double height :
External apprearance
Centronics, RS-232C (TTL level)
The LTP5000 is a series of compact, lightweight and ulta high-speed
thermal line printers in response to increasingly diversified needs for
thermal line printers. The Series boasts high reliability, high-speed
and high-resolution, stemming from SII’s technological expertise.
The LTP5000 Series comes in three types of paper width, all with the
ability to be equipped with an auto cutter. The LTP5000 is an
enhanced series of thermal line printers, ensuring a high-performance
interface with a wide variety of characters and commands.
FEATURES
• High-resolution print (8 dots/mm).
• Selectable printing speed (50 mm/sec and 25mm/sec max. for 24-
V type).
• The use of the head open mechanism ensures easy maintenance.
• Two ways to insert the paper, straight and curl (thick paper and
label printing via the straight pass).
• A specified auto cutter (ACU5000 Series) can be easily attached.
LTP5000 Series Printers & Interface
LTP5242A/B LTP5347A/B LTP5442A/B
Applications
IF5003-02B
The IF5003-02B is an interface board used specifically for the printer mechanism of the LTP5000 Series that supports parallel and serial data
input.
A wide variety of characters and commands responds to diverse needs. The IF5003-02B is equipped with a drive terminal for the ACU5000
Series auto cutter, allowing for easy attachment.
IF5003-02B
Measuring
instrument
Medical
equipment
Bar code Label
paper
Ticket
printer
13
ACU5224A
Guillotine type
63
65 to 95
24 ± 2.4
5 ± 0.25
1.2
700
10
300,000
70.0 x 58.0 x 21.5
150
ACU5212A
Guillotine type
63
65 to 95
12 ± 1.2
5 ± 0.25
4.5
700
10
300,000
70.0 x 58.0 x 21.5
150
ACU5324A
Guillotine type
97
65 to 95
24 ± 2.4
5 ± 0.25
1.0
700
10
300,000
105.0 x 58.0 x 21.5
210
ACU5424A
Guillotine type
122
65 to 95
24 ± 2.4
5 ± 0.25
1.0
700
10
300,000
130.0 x 58.0 x 21.5
250
ACU5412A
Guillotine type
122
65 to 95
12 ± 1.2
5 ± 0.25
2.4
850
10
300,000
130.0 x 58.0 x 21.5
250
Model
Cut method
Cut width(mm)
Paper thickness(μm)
Cut condition
Drive
voltage
(V)
Starting current (A) (max.)
Opration time (msec. / cycle) (max.)
Cut frequency (cut/minute) (max.)
Life (cuts)
Dimensions (W x D x H) (mm)
Weight (g) (approx.)
Motor
Detector (Control switch)
Full or partical cut (leaving one-point, 2 mm wide)
External appearance
Auto Cutters & CPU
ACU5000 Series
PT502P02
When used together with a gate array as a pair, the CPU for the
LTP5000 Series can easily create a drive board with the same variety
of functions as the interface board.
FEATURES
• Prints with less current via division control in accordance with
the number of dots to be activated.
• Supports both parallel and serial input.
• Dual-power drive system for the stepping motor minimizes
fluctuation in voltage.
• Adjusts the print energy by measuring the resistance of the
thermal head.
• Ensures high-quality print by measuring the temperature and
voltage, and adjusting the print density.
• Detects an abnormality/error in head resistance, voltage, or
temperature.
• Provides a wide variety of character functions including doublewidth/
double height, inverse print, underlining, and character
spacing control.
• Superimposes characters and bit image data.
• Provides a ruler line function, allowing ruler lines and characters
to be easily superimposed.
• High or Low print speed selection.
• Miniaturization of the control circuit through integration of
peripheral ICs onto a gate array.
• Prints on two-ply thermal paper.
• Drives the ACU5000 Series auto cutter.
* Use this CPU and a gate array (PT500GA1) as a pair.
Model number
Package form
Dimensions (W x D x H) (mm)
Configration
Injput method
Applied machanism
Character type
Line spacing
Character spacing
Operating voltage (Vcc) (V)
Operating frequency (MHz)
PT502P02
80-pin flat package
25.2 x 19.2 x 2.15
C-MOS LSI
8-bit parallel (comforming to Centronics), asychronous serial
LTP5242, LTP5246, LTP5347, LTP5442, LTP5446, LTP5437
Graphics and characters
16 dot lines space (can be changed via a command)
4-dots space (normal) (can be changed via a command)
5.0 ± 0.25
16 ± 0.5 %
FEATURES
• Full or partial paper cut is available by command input.
• Can be easily mounted using a specified attachment.
• After having been mounted, the cutter can be easily opened,
allowing for easy maintenance.
• A wide variety of medels in responce to each and every
mechanism of the LTP5000 Series.
The ACU5000 Series Auto Cutter is a guillotine type cutter developed
for the LTP5000 Series thermal line printer mechanism. Full or partial
paper cut (one point remaining cut) is available by command input.
This cutter can be easily mounted on the LTP5000 Series using a
specified attachment, allowing for easy maintenance.
14
Model
Model number
Print system
Print direction
Print timing
Home position detection
Number of columns
Character matrix (H x W) (dots)
Character size (H x W) (mm)
Dot configuration/line (H x W) (dots)
Dot pitch (vertical) (mm)
Dot pitch (horizontal) (mm)
Printing width/Paper width (mm)
Printing speed (cps)
Operating voltage range (V)
Operating temperature range (°C)
Dimensions (W x D x H) (mm)
Weight (g)
STP211 STP312 STP411
-144 -192 -256 -256 -320
Thermal serial dot system Thermal serial dot system Thermal serial dot system
Character : Bidirectional logical seek
Graphics : Unidirectional logical seek
Character : Bidirectional logical seek
Graphics : Unidirectional logical seek
Synchronized with the stepping motor
Mechanical switching system
Synchronized with the stepping motor
Mechanical switching system
Synchronized with the stepping motor
Mechanical switching system
24
7 x 5
2.40 x 1.50
8 x 144
0.35
0.32
46.1 / 58.0
46
5.0
0 to 50
+ 0.5
- 1.0
32
7 x 5
2.40 x 1.20
8 x 192
0.35
0.24
46.1 / 58.0
46
5.0
0 to 50
+ 0.5
- 1.0
84.0 x 47.0 x 27.0
Approx. 110 Approx. 110 Approx. 120
42
7 x 5
2.40 x 1.26
8 x 256
0.35
0.25
64.0 / 80.0
42
0 to 50
5.0 ± 0.5
126.5 x 45.0 x 20.4
42
7 x 5
2.40 x 1.60
8 x 256
0.35
0.35
89.6 / 112.0
41
5.0 ± 0.5
0 to 50
40
9 x 7
2.47 x 1.88
9 x 320
0.28
0.28
89.6 / 112.0
31 / 52*
5.0 ± 0.5
0 to 50
153.0 x 44.5 x 20.0
Approx. 135 Approx. 135
External appearance
STP Series printers
FEATURES
• Compact and lightweight.
• High-quality.
• Simple mechanism ensures high reliability.
• Prints characters and graphics.
• Independent head feed and paper feed and shortest distance print.
• Silent print assured by stepping motor drive.
STP211-144
STP312-256
STP411-320
APPLICATIONS
* Available depending upon the motor control method
Measuring
instrument
Medical
equipment
PDA EFT/POS Amusement
STP SERIES
The STP is a series of compact and high-performance serial type
thermal printers developed as an upper version of the MTP Series.
Due to its wide variety of functions, such as character print, graphic
print and bidirectional logical seek, the STP Series has met with
customer approval since its debut on the market. It is even easier to
use with the addition of high-speed print. Furthermore, an enhanced
lineup of models makes it possible to respond to the diverse needs of
the market.
CARD
15
External appearance
Model MTP102 MTP201 MTP401
Model number -13B -16B -20B -24B -40B
Print system Thermal serial dot system Thermal serial dot system Thermal serial dot system
Print direction Left to right Left to right Left to right
Print timing Synchronized with the tachogenerator Synchronized with the tachogenerator Synchronized with tachogenerator
Home position detection Mechanical switching system Mechanical switching system Mechanical switching system
Printing speed (room temperature, 5.0V)
(lines/sec.) Approx. 1.5 Approx. 1.2 Approx. 0.9 Approx. 0.8 Approx. 0.6
Number of columns 13 16 20 24 40
Character matrix (H x W) (dots) 7 x 5 7 x 5 7 x 5 7 x 5 7 x 5
Character size (H x W) (mm) 2.4 x 1.5 2.4 x 1.2 2.4 x 1.6 2.4 x 1.4 2.4 x 1.2
Printing width/Paper width (mm) 26.7/38.0 26.4/38.0 45.9/58.0 46.0/58.0 66.7/80.0
Reliability MCTF 5 x 10 5 lines/Failure rate : 1 x 10 -6/line max. (5.0V rated energy, room temperature, character "8" full columns print)
Operating voltage range (V) DC 5.0 ± 1.0 DC 5.0 ± 1.0 DC 5.0 ± 1.0 DC 5.0 ± 1.0 DC 5.0 ± 1.0
Operating temperature range (¥C) 0 to 50 0 to 50 0 to 50 0 to 50 0 to 50
Dimensions (W x D x H) (mm) 48.0 x 31.0 x 13.8 48.0 x 31.0 x 13.8 70.0 x 34.0 x 14.4 70.0 x 34.0 x 14.4 91.5 x 35.5 x 20.0
Weight (g) Approx. 35 Approx. 35 Approx. 40 Approx. 40 Approx. 50
MTP Series Printers
MTP SERIES
The MTP is a series of ultra small and low-end thermal printers
developed in response to the demand for compact and low price
requirements. An enhanced lineup of the MTP Series covers both
character and graphic print. High-reliability, high-quality print is
assured due to the ultra simple design and operationability. Since its
debut on the market, the MTP Series has met with great customer
satisfaction.
FEATURES
• Compact and lightweight.
• High-quality.
• Battery-powered.
• High-cost performance.
• Designed for versatile applications.
• Simple mechanism ensures high-reliability
CHARACTER PRINTERS
GRAPHIC PRINTERS
MTP102-16B MTP201-24B MTP401-40B
APPLICATIONS
Medical
equipment
Measuring Amusement
instrument
Hand-held
terminal
Model MTP201 MTP401
Model number -G128 -G166 -G256 -G280
Print system Thermal serial dot system Thermal serial dot system Thermal serial dot system Thermal serial dot system
Print direction Left to right Left to right Left to right Left to right
Print timing
Synchronized with the
tachogenerator
Synchronized with the
tachogenerator
Synchronized with the
tachogenerator
Synchronized with the
tachogenerator
Home position detection Mechanical switching system Mechanical switching system Mechanical switching system Mechanical switching system
Printing speed (room temperature, 5.0V)
(lines/sec.) Approx. 0.9 Approx. 0.8 Approx. 0.6 Approx. 0.6
Character matrix (H x W) (dots) 7 x 5 7 x 5 7 x 5 7 x 5
Character size (H x W) (mm) 2.4 x 1.7 2.4 x 1.4 2.4 x 1.3 2.4 x 1.2
Dot configuration/line (H x W) (dots) 8 x 128 8 x 166 8 x 256 8 x 280
Dot pitch (vertical) (mm) 0.35 0.35 0.35 0.35
Dot pitch (horizontal) (mm) 0.35 0.28 0.26 0.24
Printing width/Paper width (mm) 44.8/58.0 46.0/58.0 66.6/80.0 67.2/80.0
Reliability MCTF 5 x 10 5 lines/Failure rate : 1 x 10 -6 /line max. (5.0V rated energy, room temperature, character "8" full columns print)
Operating voltage range (V) DC 5.0 ± 1.0 DC 5.0 ± 1.0 DC 5.0 ± 1.0 DC 5.0 ± 1.0
Operating temperature range (¥C) 0 to 50 0 to 50 0 to 50 0 to 50
Dimensions (W x D x H) (mm) 70.0 x 34.0 x 14.4 70.0 x 34.0 x 14.4 91.5 x 35.5 x 20.0 91.5 x 35.5 x 20.0
Weight (g) Approx. Approx. 40 Approx. 50 Approx. 50
16
External appearance
Model IF4112-GCB IF0121-GCB IFM001-01B IFM001-01BM
CPU M50747-500SP M50747-753SP HD6433238R43F HD6433238R43F
Operating voltage range (V) DC 5 ± 0.5 DC 5 ± 0.5 Vp : 5.0 ± 1.0 Vcc : 5.0 ± 0.5 Vp : 5.0 ± 1.0 Vcc : 5.0 ± 0.5
Character matrix (H x W) (dots) 9 x 7 7 x 5 7 x 5, 8 x 5 7 x 5, 8 x 5
Character type
Alphanumerals,symbols,special
patterns, international characters
Alphanumerals, symbols, special
patterns, international characters
Alphanumerals, symbols, special
patterns, international characters
Alphanumerals, symbols, special
patterns, international characters
downloaded characters
Input method 8-bit parallel, RS-232C 8-bit parallel, RS-232C 8-bit parallel, RS-232C 8-bit parallel, RS-232C
Print mode Character & graphics mode Character & graphics mode Character & graphics mode Character & graphics mode
Dimensions (W x D x H) (mm) 120.0 x 119.0 x 22.0 130.0 x 118.0 x 22.0 71.5 x 59.0 x 11.5 71.5 x 59.0 x 11.5
Interface
IF4112-GCB
The IF4112-GCB is an interface board used specifically for the
STP411-320 thermal serial printer. Compressed/expanded characters
and international special charactes can be printed. Graphics and
characters can be printed on the same line. Both 8-bit parallel and
serial (RS-232C) input are available.
IF0121-GCB
The IF0121-GCB is an interface board for the 8-dot thermal print
head mechanism of the STP Series. It can drive all 5 models of the
STP Series and print ANK, international characters, and graphics.
Graphics and characters can be printed on the same line. Both 8-bit
parallel and serial (RS-232C) input are available.
IFM001-01B/01BM
The IFM001-01B is a new interface board that prints data from a
host system on all the models in the MTP Series. Both 8-bit parallel
and serial (RS-232C) input are available. The IFM001-01B is
equipped with a wide variety of commands such as double-width
print, character spacing control, and inverse print, and can print on a
graphic printer. The IFM001-01BM is equipped with an EEPROM,
allowing downloaded characters to be printed.
* Printer control CPU
When you create an interface board originally, CPU only is available.
IF0121-GCB
IFM001-01BM
IF4112-GCB
INTERFACES and compatible mechanisms
Interface IF4112-GCB IF0121-GCB IFM001-01B/01BM
Printer mechanism STP411-320
STP211-144/192
STP312-256
STP411-256/320
All MTP Series mechanisms
17
External appearance
Model DPU-3372
Model number DPU-3372-1AS DPU-3372-0AS
Number of columns Font A : 42, Font B : 56, Font C : 34, Font D : 23
Character matrix (H x W) (dots) Font A : 24 x 12, Font B : 17 x 9, Font C : 24 x 15, Font D : 24 x 22
Character size (H x W) (mm) Font A : 3.2 x 1.5, Font B : 2.3 x 1.3, Font C : 3.2 x 2.0, Font D : 3.2 x 3.0
Character type IBM compatible characters
Dot configuration (dots/line) 512 512
Printing speed (mm/sec.) (max.) 50.8 (2 inches/sec.) 50.8 (2 inches/sec.)
Printing width/Paper width (mm) 72/80 72/80
Input method (connecter type)
Standard specification: Serial : RS-232C (25-pin D-SUB)
Optional board: Parallel : Centronics (36-pin Amphenol)
Power source (model number) Specified AC adapter (PW-3024)
Paper cut Auto cutter Tear bar
Dimensions (W x D x H) (mm) 145.0 x 224.0 x 129.0 (excluding AC adapter) 145.0 x 224.0 x 129.0 (excluding AC adapter)
Weight (g) Approx. 1,100 (excluding paper and AC adapter) Approx. 900 (excluding paper and AC adapter)
DPU-3372 Printer Units
FEATURES
• Conforms to the "ESC/POSTM" command system.
• Downloaded characters/bit image backup function.
• Firmware can be rewritten by the built-in flash memory.
• Interface can be input in parallel via the optional board.
• Two models with and without auto cutter are available.
• Two colors (gray / ivory) are available
* ESC/POS™ is a trademark of Seiko Epson Corporation.
DPU-3372
The DPU-3372 is a new design, easy-to use, stand-alone, desk top
multifunctional thermal line printer unit. A wide variety of
commands, downloaded characters/graphics, and firmware rewrite
function by the built-in flash memory respond to diversified customer
needs.
POS/ECR
APPLICATIONS
GRAY IVORY
* Ivory type : DPU - 3372 - 1AS - A
DPU - 3372 - 0AS - A
18
Model
Model number
Number of columns
Character matrix (H x W) (dots)
Character size (H x W) (mm)
Character type
Dot configuration (H x W) (dots)
Printing speed (mm/sec.) (max.)
Print width/Paper width (mm)
Input method (connector type)
Power source (Model number)
Operating temperature range (°C)
Paper cut
Dimensions (W x D x H) (mm)
Weight (g)
DPU-5300
41
24 x 12
3.0 x 1.5
576
50
72 / 80
8-bit parallel (36-pin, Amphenol), Serial (9-pin, D-SUB)
Specified AC adapter (PW-5024)
5 ~ 40
DPU-5400
59
24 x 12
3.0 x 1.5
832
50
104 / 112
8-bit parallel (36-pin, Amphenol), Serial (9-pin, D-SUB)
Specified AC adapter (PW-5024)
5 ~ 40
DPU-5347-0B DPU-5347-1B DPU-5442-0B DPU-5442-1B
Tear bar
190 x 140 x 224
Approx. 2,200
Auto cutter
190 x 140 x 249
Approx. 2,500
Tear bar
190 x 140 x 224
Approx. 2,300
Auto cutter
190 x 140 x 249
Approx. 2,600
Extended graphics character set,
international characters
Extended graphics character set,
international characters
External appearance
DPU-5000 Series Printer Units
DPU-5300/5400
The DPU5300/5400 is a multifunctional thermal line printer
designed specifically for use in POS systems. It performs high speed
printing at 50mm/sec max., and prints on label and two-ply thermal
paper. It brings its printing functions into full play using a wide variety
of characters and function commands. It can also easily print bar
code using a
bar code print function. Some models are equipped with an auto cutter
to enrich this series. The DPU5300/5400 can be installed either
vertically (basic position) or horizontally.
FEATURES
• Prints, international characters of 13 countries, extended graphics,
and other user-defined external characters.
• Automatic load system ensures correct and easy paper load.
• Long paper rolls (approx. 100m) can be loaded, saving time to be
consumed for paper replacement.
• The bar-code function allows for easy bar-code print (CODE39,
UPC, JAN, EAN, ITF, CODABAR).
• Some models of the DPU-5300/5400 are equipped with an auto
cuter.
DPU-5300 DPU-5400
(Automation Cutter Model)
APPLICATIONS
POS/ECR Bar code Measuring
instrument
Label
paper
19
External appearance
Model DPU-3245
Model number DPU-3245
Number of columns 24 (24 x 12 dots), 16 (24 x 24 dots), 24 (16 x 16 dots)
Character matrix (H x W) (dots) 24 x 12, 24 x 24, 16 x 16
Character size (H x W) (mm) 3.0 X 1.5 (24 X 12 dots), 3.0 X 3.0 (24 X 24 dots), 2.0 X 2.0 (16 X 16 dots)
Character type Alphanumerals, graphics, international characters
Dot configuration (dots/line) 384
Printing speed (mm/sec.) (max.) 25
Printing width/Paper width (mm) 48/58
Input method (connecter type) Serial (9-pin D-SUB)
Power source (Model number) Specified AC adapter with a charger (PWC-3007), Specified AC adapter (PW-3006), Battery pack (BP-3006)
Paper cut Tear bar
Dimensions (W x D x H) (mm) 93 x 252 x 64 (printer with a paper holder), 97 x 177 x 42.5 (AC adapter with a charger), 97 x 177 x 33 (AC adapter)
Weight (g)
Approx. 430 (printer and paper holder, without paper and battery)
Approx. 380 (AC adapter with a charger, without AC cable)
Approx. 330 (AC adapter without AC cable)
DPU-3245 Printer Units
DPU-3245
The DPU-3245 is a portable, high-speed (25 mm/sec max.) and
high-resolution (8 dots/mm) thermal line printer unit. It can print highresolution
characters, and has a wide variety of characters and
commands. The DPU-3245 can print not only on normal thermal
paper, but also on two-ply thermal paper or thermal labels. This model
is suited for printing receipts, measurement results, and labels for
inventory control. The DPU-3245
uses rechargeable packed nickel-hydrogen batteries, allowing for easy
battery charge and replacement. Because the battery charger can be
attached under the printer unit and used as an AC adapter, it requires
less space.
FEATURE
• Small-size and portability give it approx. 8-fold speed advantage
over conventional serial printers (maximum print speed: 25 mm/
sec).
• Prints graphic characters, international characters, downloaded
characters, and user-defined characters by command input.
• Enough space to load long paper rolls of approx. 34 m and enough
power to print one or more paper rolls with fully-charged.
• Automatic load system ensures correct and easy paper load.
• Automatic power OFF switch minimizes battery consumption.
• Prints on two-ply thermal paper and labels.
• Optional AC adapter stand.
Mounted on the AC adapter with a charger
APPLICATIONS
Measuring POS/ECR
instrument
Hand-held
terminal
20
Model
Model number
Ni-Cd battery
No. of columns (Half-size)
Character matrix (H x W) (dots)
Character size (H x W) (mm)
Character type
Dot configuration/line (H x W) (dots)
Printing speed (CPS) (max.)
Paper width (mm)
Input method
Power source
Operating temperature range (°C)
Paper cut
Dimensions (W x D x H)
Weight (g)
DPU-201G
DPU-201G-01PU/PE
Yes
27
7 x 5
2.4 x 1.4
8 x 166
22
58
8-bit parallel
Built-in charger
0 to 40
Tear bar
135 x 100 x 35
Approx. 400
DPU-201GS
DPU-201GS-01SU/SE
Yes
27
7 x 5
2.4 x 1.4
8 x 166
22
58
Serial
0 to 40
Tear bar
135 x 100 x 35
Approx. 370
DPU-414-30B
No
9 x 7
9 x 320
52.5 (Normal characters)
112
8-bit parallel/serial
0 to 40
Tear bar
160 x 170 x 66.5
Approx. 580
2.5 x 1.9 (Normal), 2.5 x 0.9 (Condensed)
40 (Normal), 80 (Condensed)
extended graphics character set, international characters
DPU-414
Supplied special AC
adapter and built-in charger
Special AC adapter and battery
External appearance
DPU Series Printer Units (Stand-alone type)
APPLICATIONS
DPU-201G/GS
The DPU-201G/GS is a compact,lightweight, portable thermal serial
printer powered by Ni-Cd rechargeable batteries and can be installed
anywhere. It can print a wide variety of characters. The DPU-201G
is an 8-bit parallel input type powered only by rechargeable batteries.
The DPU-201GS is a serial input printer powered by rechargeable
batteries or an AC adapter and used as a stand-alone printer.
DPU-414
The DPU-414 is a compact desktop thermal printer ensuring silent
and high-quality print. The auto loading function to facilitate paper
loading and replacement and the dual-power supply (AC adapter and
rechargeable batteries) make this printer more convenient. It is
equipped with serial parallel interfaces. It contains international
characters of 11 countries and about 28K bytes of buffer memory to
meet various needs.
Medical
equipment
Measuring
instrument
DPU-201GS DPU-414
FEATURES
• Compact and lightweight (DPU-20IG: Approx. 400 g; DPU-
201GS: Approx. 370 g).
• Supports simple Centronics input (DPU-201G) and serial input
(DPU-201GS).
• Ni-Cd rechargeable batteries are built in, allowing for easy
transportation.
• Silent print and maintenance-free.
FEATURES
• High-speed print (52.5 characters/sec).
• Incorporating international characters of 11 countries.
• Prints 40 column-standard characters and 80 column-condensed
characters.
• Equipped with an auto loading function to facilitate paper loading
and replacement.
• Dual-power supply (Can be install rechargeable batterie)
• Environmentally-friendly Nickel hydrogen (Ni-MH) batteries
available.
• Equipped with both simplified Centronics and serial input
terminals.
21
External appearance
Model DPU10 DPU20
Model number DPU-10-13CF DPU-10-16CF DPU-10-20CF DPU-20-20CF DPU-20-24CF
Number of columns 13 16 20 20 24
Character matrix (H x W) (dots) 7 x 5 7 x 5 7 x 5 7 x 5 7 x 5
Character size (H x W) (mm) 2.4 x 1.5 2.4 x 1.2 2.0 x 1.1 2.4 x 1.6 2.4 x 1.4
Character type Alphanumerals, characters
Alphanumerals, characters,
International characters
Dot configuration/line
(H x W) (dots) 7 x 89 7 x 110 7 x 138 7 x 138 7 x 166
Printing speed (CPS) 20 19 20 16 19
Paper width (mm) 38 38 38 58 58
Input method (connecter type) 8-bit parallel (34-pin ribbon cable) 8-bit parallel (34-pin ribbon cable)
Power source No (DC 5V) No (DC 5V) No (DC 5V) No (DC 5V) No (DC 5V)
Operating temperature range (¥C) 0 to 50 0 to 50 0 to 50 0 to 50 0 to 50
Paper cut Tear bar Tear bar Tear bar Tear bar Tear bar
Dimensions (W x D x H) (mm) 86 x 107 x 37 86 x 107 x 37 86 x 107 x 37 108 x 121 x 68 108 x 121 x 68
Weight (g) Approx. 140 Approx. 140 Approx. 140 Approx. 360 Approx. 360
DPU Series Printer Units (Panel-mount type)
DPU-10/DPU-20
The DPU-10/DPU-20 is an ultra small panel-mount type thermal serial
printer unit incorporating a data memory as well as a character
generator, and can easily be mounted on any device taking up a
minimum space. The Series can print a wide variety of characters
and data from a computer or host system via the Centronics input.
The DPU-20 can also print double-width and inverse characters. The
DPU-10/DPU-20 can be installed anywhere horizontally or vertically
making them ideal for recording data from all types of host systems.
FEATURES (Panel-mount type)
• Compact, lightweight, small attachment area in response to
compact devices.
• Paper replacement and maintenance can be easily made from the
panel side.
• A 5-V single power drive simplifies the power system.
• Maintenance-free ensures long-term operation only by replenishing
paper.
• Can be mounted horizontally or vertically.
• The DPU-20 can prints double-width/double-height, and inverse
characters.
DPU-10-16CF DPU-20-20CF
APPLICATIONS
Medical
equipment
Measuring
instrument
Ticket
printer
22
Printer Mechanism Specifications List
LTP2000
LTP3000 Series
LTP5000 Series
LTP1245
Model
Number of columns
Printing speed (mm/sec.) (max.)
Character matrix (H x W) (dots)
Dot resolution (dots/mm)
Dot configuration (dots/line)
Printing width/Paper width (mm)
Operating voltage range
Logic & head (V)
Operating temperature range (°C)
Peak current Vp (A)
Thermal head service life
Dimensions (W x D x H) (mm)
Exclusive of lever
Weight (g)
LTP2242
8
432
54 / 60
5.0 ± 0.25
24 ± 2.4
0 to 50
6.3
Approx. 115
LTP2342
8
576
72 / 80
5.0 ± 0.25
24 ± 2.4
0 to 50
8.4
Approx. 135
LTP2442
8
832
104 / 112
5.0 ± 0.25
24 ± 2.4
0 to 50
Approx. 160
27 36 52
10.6
90 75 75
24 x 12 24 x 12 24 x 12
Anti-pulse characteristic: 108 pulses, abrasion resistance: 50km
(720 dotlines / s) (600 dotlines / s) (600 dotlines / s)
85.2 x 61.4 x 27 106.4 x 61.4 x 27 138.2 x 61.4 x 27
Model
Number of columns
Printing speed (mm/sec.) (max.)
Character matrix (H x W) (dots)
Dot resolution (dots/mm)
Dot configuration (dots/line)
Printing width/Paper width (mm)
Operating voltage range
Logic & head (V)
Operating temperature range (°C)
Peak current Vp (A)
Thermal head service life
Dimensions (W x D x H) (mm)
Exclusive of lever
Weight (g)
LTP1245
8
384
48 / 58
4.5 to 5.5
4.2 to 8.5
-5 to 50
3.3 : Vp = 8.0 V
72 x 39.5 x 16
Approx. 45
24
62.5 (500 dotlines / s)
: Vp = 8V
24 x 12
Anti-pulse characteristic: 108 pulses, abrasion resistance: 50km
Model LTP5242-448 LTP5246 448 LTP5347-576 LTP5442-832 LTP5446-832 LTP5437-640
Number of columns 28 28 36 52 52 40
Printing speed (mm/sec.) (max.) 50 (400 dot lines/sec.) 25 (200 dot lines/sec.) 50 (400 dot lines/sec.) 50 (400 dot lines/sec.) 25 (200 dot lines/sec.) 50 (300 dot lines/sec.)
Character matrix (H x W) (dots) 24 x 12 24 x 12 24 x 12 24 x 12 24 x 12 24 x 12
Dot resolution (dots/mm) 8 8 8 8 8 6
Dot configuration (dots/line) 448 448 576 832 832 640
Printing width/Paper width (mm) 56/60 56/60 72/80 104/112 104/112 105.6/112
Operating voltage range
logic & Head (V)
DC 5.0 ± 0.25
DC 22.1 to 25.4
DC 5.0 ± 0.25
DC 11.5 to 12.2
DC 5.0 ± 0.25
DC 23.1 to 25.1
DC 5.0 ± 0.25
DC 22.1 to 25.4
DC 5.0 ± 0.25
DC 11.5 to 12.2
DC 5.0 ± 0.25
DC 22.9 to 24.9
Operating temperature range (° C) 0 to 50 0 to 50 0 to 50 0 to 50 0 to 50 0 to 50
Peak current Vp (A) 6.7 (2-blocks division) 6.9 (2-blocks division)
10.9 (2-blocks division)
7.1 (3-blocks division)
10.8 (2-blocks division) 11.0 (2-blocks divisioin) 12.6 (2-blocks division)
Thermal head service life Anti-pulse charactristic : 5 x 107 pulses Abrasion resistance : 30 km
Dimensions (W x D x H) (mm) 105.4 x 59.5 x 36.5 105.4 x 59.5 x 36.5 125.4 x 59.5 x 36.5 157.4 x 59.5 x 36.5 157.4 x 59.5 x 36.5 157.4 x 59.5 x 36.5
Weight (g) Approx. 280 Approx. 280 Approx. 320 Approx. 380 Approx. 380 Approx. 380
Model LTP3245A/B-384 LTP3245F/G-384 LTP3345-576 LTP3342-576 LTP3445-832
Number of columns 24 24 36 52
Printing speed (mm/sec.) (max.) 22.5 (180 dot lines/sec.)
27.5 (220 dot lines/sec.)
: Vp = 5V
54.5 (43 dot lines/sec.)
: Vp = 7V
25 (200 dot lines/sec.)
: Vp = 5V
45 (360 dot lines/sec.)
: Vp = 7V
50 (400 dot lines/sec.)
56.25 (450 dot lines/sec.)
: Vp = 8.5V
50 (400 dot lines/sec.)
: Vp = 7.2V
Character matrix (H x W) (dots) 24 x 12 24 x 12 24 x 12 24 x 12 24 x 12
Dot resolution (dots/mm) 8 8 8 8 8
Dot configuration (dots/line) 384 384 576 576 832
Printing width/Paper width (mm) 48/58 48/58 72/80 72/80 104/112
Operating voltage range
logic & Head (V)
DC 4.2 to 5.5
DC 4.2 to 6.0
DC 4.2 to 5.5
DC 4.2 to 7.0
DC 5.0 ± 0.5
DC 4.2 to 7.0
DC 5.0 ± 0.25
DC 24.0 ± 1.2
DC 5.0 ± 0.5
DC 4.2 to 8.5
Operating temperature range (° C) 0 to 50 0 to 50 0 to 50 0 to 50 0 to 50
Peak current Vp (A) 3.8 4.0 : Vp = 5V
3.5 : Vp = 5V
4.9 : Vp = 7V
2.7 2.8 : Vp = 7.2V
Thermal head service life Anti-pulse charactristic : 5 x 107 pulses, Abrasion resistance : 30 km (Abrasion resistance : 50 km LTP3445 only)
Dimensions (W x D x H) (mm) 76.3 x 50.0 x 20.0 76.0 x 54.0 x 21.0 97.0 x 57.0 x 21.0 97.0 x 57.0 x 21.0 129.0 x 51.0 x 21.0
Weight (g) Approx. 80 Approx. 105 Approx. 115 Approx. 115 Approx. 135
23
STP Series
LTP Series
MTP Series * Available depending upon the motor control method
Model LTP256-192 CAP256 LTP4242-432 LTP7242-432
Number of columns 24 24 27 27
Printing speed (mm/sec.) (max.) 70 (280 dot lines/sec.) 70 (280 dot lines/sec.) 70 (560 dot lines/sec.) 100 (800 dot lines/sec.)
Character matrix (H x W) (dots) 9 X 8 9 X 8 24 x 12 (Normal) 24 x 12 (Normal)
Dot resolution (dots/mm) 4 4 8 8
Dot configuration (dots/line) 192 192 432 432
Printing width/Paper width (mm) 48/58 48/58 54/58 54/58
Operating voltage range
logic & Head (V)
DC 5.0 ± 0.25
DC 24.0 ± 1.0
DC 5.0 ± 0.25
DC 24.0 ± 1.0
DC 5.0 ± 0.5
DC 24.0 ± 2.4
DC 5.0 ± 0.25
DC 24.0 ± 2.4
Operating temperature range (° C) 0 to 50 0 to 50 0 to 50 0 to 50
Peak current Vp (A) 5.6 5.6 7.4 (2-blocks division) 9.1 (2-blocks divide)
Thermal head service life Anti-pulse charactristic : 5 x 107 pulses, Abrasion resistance : 30 km
Anti-pulse charactristic :
1 x 10 8 pulses
Abrasion resistance :
100 km
Dimensions (W x D x H) (mm) 80.0 x 62.0 x 41.0 84.0 x 73.0 x 70.0 86.5 x 52.0 x 22.0 88.0 x 73.0 x 36.3
Weight (g) Approx. 170 Approx. 330 Approx. 150 Approx. 210
Model STP211-144 STP211-192 STP312-256 STP411-256 STP411-320
Number of columns 24 32 42 42 40
Printing speed (CPS) 46 46 42 41 31/52*
Character matrix (H x W) (dots) 7 X 5 7 X 5 7 X 5 7 X 5 9 X 7
Character size (H x W) (mm) 2.40 x 1.50 2.40 x 1.20 2.40 x 1.26 2.40 x 1.60 2.47 x 1.88
Dot configuration/line (H x W) (dots) 8 x 144 8 x 192 8 x 256 8 x 256 9 x 320
Printing width/Paper width (mm) 46.1/58 46.1/58 64.0/80 89.6/112 89.6/112
Operating voltage range (V) DC 5.0 -+10..05 DC 5.0 ± 0.5 DC 5.0 ± 0.5 DC 5.0 ± 0.5
Operating temperature range (° C) 0 to 50 0 to 50 0 to 50 0 to 50 0 to 50
Peak current Vp (A) 3.5 (5.5 V) 3.5 (5.0 V) 3.2 (5.0 V) 3.5 (5.0 V)
Relaiability MCTF : 5 x 10 5 lines/Failure rate : 1 x 10 -6 /line
Dimensions (W x D x H) (mm) 80.0 x 47.0 x 27.0 126.5 x 45.0 x 20.4 153.0 x 44.5 x 20.0
Weight (g) Approx. 110 Approx. 110 Approx. 120 Approx. 135 Approx. 135
Model MTP102-13B MTP102-16B MTP201-20B MTP201-24B
Number of columns 13 16 20 24
Printing speed (lines/sec.) Approx. 1.5 (20 CPS) Approx. 1.2 (19 CPS) Approx. 0.9 (18 CPS) Approx. 0.8 (19 CPS)
Character matrix (H x W) (dots) 7 X 5 7 X 5 7 X 5 7 X 5
Character size (H x W) (mm) 2.4 x 1.5 2.4 x 1.2 2.4 x 1.6 2.4 x 1.4
Dot configuration/line (H x W) (dots) 7 x 89 7 x 110 7 x 138 7 x 166
Printing width/Paper width (mm) 26.7/38 26.4/38 45.9/58 46.0/58
Operating voltage range (V) DC 5.0 ± 1.0 DC 5.0 ± 1.0 DC 5.0 ± 1.0 DC 5.0 ± 1.0
Operating temperature range (° C) 0 to 50 0 to 50 0 to 50 0 to 50
Peak current Vp (A) 3.2 A (5.0 V, All dots on)
Relaiability MCTF : 5 x 10 5 lines/Failure rate : 1 x 10 -6 /line
Dimensions (W x D x H) (mm) 48.0 x 31.0 x 13.8 48.0 x 31.0 x 13.8 70.0 x 34.0 x 14.4 70.0 x 34.0 x 14.4
Weight (g) Approx. 35 Approx. 35 Approx. 40 Approx. 40
Model MTP401-40B MTP201-G128 MTP201-G166 MTP401-G256 MTP401-G280
Number of columns 40 18 24 36 40
Printing speed (lines/sec.) Approx. 0.6 (24 CPS) Approx. 0.9 (16 CPS) Approx. 0.8 (19 CPS) Approx. 0.6 (22 CPS) Approx. 0.6 (24 CPS)
Character matrix (H x W) (dots) 7 X 5 7 X 5 7 X 5 7 X 5 7 X 5
Character size (H x W) (mm) 2.4 x 1.2 2.4 x 1.7 2.4 x 1.4 2.4 x 1.3 2.4 x 1.2
Dot configuration/line (H x W) (dots) 7 x 278 8 x 128 8 x 166 8 x 256 8 x 280
Printing width/Paper width (mm) 66.7/80 44.8/58 46.0/58 66.6/80 67.2/80
Operating voltage range (V) DC 5.0 ± 1.0 DC 5.0 ± 1.0 DC 5.0 ± 1.0 DC 5.0 ± 1.0 DC 5.0 ± 1.0
Operating temperature range (° C) 0 to 50 0 to 50 0 to 50 0 to 50 0 to 50
Peak current Vp (A) 3.2 A (5.0 V, All dots on)
Relaiability MCTF : 5 x 10 5 lines/Failure rate : 1 x 10 -6 /line
Dimensions (W x D x H) (mm) 91.5 x 35.5 x 20.0 70.0 x 34.0 x 14.4 70.0 x 34.0 x 14.4 91.5 x 35.5 x 20.0 91.5 x 35.5 x 20.0
Weight (g) Approx. 50 Approx. 40 Approx. 40 Approx. 50 Approx. 50
24
DPU Series Specifications List
Model
Model number
Number of columns
Character matrix (H x W) (dots)
Character size (H x W) (mm)
Character type
Dot configuration (H x W) (dots/line)
Printing speed (max.)
Paper width (mm)
Input method (connector type)
Power source
Operating temperature range (°C)
Paper cut
Dimensions (W x D x H)
Weight (g)
DPU-3245
DPU-3245
58
5 to 40
93 x 252 x 64
Approx. 430
DPU-5300
80
DPU-3372
145 x 224 x 129
DPU-5400
112
DPU-3372-0AS DPU-3372-1AS DPU-5347-0B DPU-5347-1B DPU-5442-0B DPU-5442-1B
24 x 12 24 x 12
3.0 x 1.5 3.0 x 1.5
Alpanamerals, extended
graphics character set,
international characters
Alpanamerals, extended graphics character set, international
IBM compatible character set characters, bar code
384 512 576 832
360 (dot lines/s)
(2 inches/s)
Serial (25-pin, D-SUB)
(Option) 8-bit parallel
(36-pin, Amphenol)
8-bit parallel (36-pin, Amphenol)
Serial (25-pin, D-SUB)
AC adapter with
special charger
and battery pack
24 (24 x 12) 41 59
16 (24 x 24)
24 (16 x 16)
24 x 12
3.0 x 1.5 (24 x 12)
3.0 x 3.0 (24 x 24)
2.0 x 2.0 (16 x 16)
Font A: 24 x 12
Font B: 17 x 9
Font C: 24 x 15
Font D: 24 x 22
Font A: 3.2 x 1.5
Font B: 2.3 x 1.3
Font C: 3.2 x 2.0
Font D: 3.2 x 3.0
Font A: 42, Font B: 56
Font C: 34, Font D: 23
Tear bar Tear bar Auto cutter Tear bar Auto cutter Tear bar Auto cutter
Approx. 900 Approx. 1,100 Approx. 2,200 Approx. 2,500 Approx. 2,300 Approx. 2,600
200 (dot lines/s)
Serial
(9-pin, D-SUB)
400 (dot lines/s) 400 (dot lines/s)
5 to 40 5 to 40 5 to 40 5 to 40 5 to 40 5 to 40
190 x 140 x 224 190 x 140 x 249 190 x 140 x 224 190 x 140 x 249
Special AC adapter Special AC adapter Special AC adapter
80
Model DPU-10 DPU-20 DPU-201G DPU-201GS DPU-414
Model number DPU-10-13CF DPU-10-16CF DPU-10-20CF DPU-20-20CF DPU-20-24CF DPU-201G-01PU/PE DPU-201G-01SU/SE DPU-414-30B
Number of columns (Normal) 13 16 20 20 24 27 27
40 (Normal)
80 (Condensed)
Character matrix (H x W) (dots) 7 X 5 7 X 5 7 X 5 7 X 5 7 X 5 7 X 5 7 X 5 9 X 7
Character size (H x W) (mm) 2.4 x 1.5 2.4 x 1.2 2.0 x 1.1 2.4 x 1.6 2.4 x 1.4 2.4 x 1.4 2.4 x 1.4
2.5 x 1.9 (Normal)
2.5 x 0.9 (Condensed)
Character type Alphanumerals
Alphanumerals,
international characters
Alphanumerals, extended graphics character set,
international characters
Dot configuration (H x W) (dots/line) 7 x 89 7 x 110 7 x 138 7 x 138 7 x 168 8 x 166 8 x 166 9 x 320
Printing speed (Normal size) (CPS) 20 19 20 16 19 22 22 52.5
Paper width (mm) 38 38 38 58 58 58 58 112
Input method (connecter type) 8-bit parallel (34-pin ribbon cable) 8-bit Parallel
(14-pin Amphenol)
Serial
(9-pin D-SUB)
8-bit parallel(36-pin,
Amphenol)Serial (9-pin, D-SUB)
Power source No (to be supplied externally: 5 V 5% DC) Built-in Battery
Specified AC
Adapter and
built-in Battery
Special AC adapter and battery
Operating temperature range (° C) 0 to 50 0 to 50 0 to 50 0 to 50 0 to 50 0 to 40 0 to 40 0 to 40
Paper cut Tear bar Tear bar Tear bar Tear bar Tear bar Tear bar Tear bar Tear bar
Dimensions (W x D x H) (mm) 86 x 107 x 37 108 x 121 x 68 135 x 100 x 35 160 x 170 x 66.5
Weight (g) Approx. 140 Approx. 140 Approx. 140 Approx. 360 Approx. 360 Approx. 400 Approx. 370 Approx. 580
25
Recommended thermal paper
Seiko Instruments Inc. recommends the following paper to best print.
Custom Products
Seiko Instruments Inc. offers paper meeting each and every customer request (ex. preprint paper). Contact us.
Note: The thermal paper is rolled in accordance with its external dimensions. Values of the paper length listed on the above table are only for your reference.
SAFETY PRECAUTIONS
1. This catalog provides a summary of product specifications. Before using each
product, please thoroughly read the technical manual, user's manual, and other
manuals which have been prepared by us.
2. The products listed in this catalog are not allowed to be used as part of any lifesupport
system or any other equipment or system which requires extremely
high reliability, without our permission in writing.
3. When using each product, thoroughly understand the specifications of the
product, observe the descriptions and markings for prevention and avoidance
of danger, on your products and in the documents such as the manual, and
advise and guide your customers (users).
GENERAL NOTES
1. Because of our continuous research for improvements, the contents in this
catalog may be changed without prior notice.
2. Since the photo of each product is printed, the color of the photo may be different
from that of the real product. Before use, please check the actual color of the
product.
3. Concerning the use of information, drawings, etc. in this catalog, we shall not
guarantee the industrial property, intellectual property, and other rights of a
third party or grant their licenses. Accordingly, we will not assume responsibility
for violation of the third party's rights attributable to such use.
4. No part of this catalog may be reprinted. reproduced or used for other purposes
without our written permission.
5. Warranty is limited to the product unit delivered. We will be exempted from
responsibility for any damage which may be caused by any defect of this product.
MTP102
MTP201
MTP401
STP211
STP312
STP411
LTP1245/LTP32XX
LTP22XX/LTP52XX
LTP23XX/LTP53XX/LTP33XX
LTP24XX/LTP54XX/LTP3445
LTP256/CAP256
LTP4242/LTP7242
DPU-10
DPU-20
DPU-201G
DPU-414/DPU-412
DPU-3245
DPU3372
DPU5300
TP-102C
TP-211C
TP-312C
TP-211C
TP-312C
TP-451C
TP-322L
TP-521C
TP-312C
TP-451C
TP-251C
TP-211C
TP-102C
TP-201C
TP-202L
TP-411L
TP-321L
TP-531
TP531
TP-535 (2-PLAY PAPER)
TP-541
TP-545 (2-PLAY PAPER)
TP-547 (RECYCLED PAPER)
TP038-08C
TP058-25C
TP080-25C
TP058-25C
TP080-25C
TP112-25C
TP058-09L
TP060-25C
TP080-25C
TP112-25C
TP058-28CH1
TP058-25C
TP038-08C
TP058-18C
TP058-07L
TP411-28CL
TP-321L
TP-531
TP-531
TP-535 (2-PLAY PAPER)
TP-541
TP-545 (2-PLAY PAPER)
Printer Thermal paper Conventional thermal paper Specifications
Paper width (mm)
38
58
80
58
80
112
58
60
80
112
58
58
38
58
58
112
58
80
112
External diameter (mm)
28
48
48
48
48
48
30
48
48
48
50
48
28
38
25
48
55
90
90
90
90
Internal diameter (mm)
11.2
12
12
12
12
12
9
12
12
12
12
12
11.2
9
9
9
9
12
12
12
12
Length (m)
(8)
(25)
(25)
(25)
(25)
(25)
(9)
(25)
(25)
(25)
(28)
(25)
(8)
(18)
(7)
(28)
(34)
(100)
(100)
(70)
(100)
(70)
(100)
Rolls/Box
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
12
12
12
12
Core
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
Yes
DPU-5400 Yes