MG5436雷达磁控管可用于：Furuno/古野 FAR-2127、2827/w、 DRS25A、FR-8252、1964 C-BB、1964 C、FAR-2127 BB/DC、FAR-2127 BB。FR-1525MKIII、FR-2125、FR-2825、FR-7252。
为避免以后产生其他问题，我们不建议E2V的磁控管使用在JRC的雷达上，虽然磁控管的参数相同，理论上可通用。
A magnetron is an important component of a radar system. As sole and global distributor of EEV marine radar magnetrons, we can supply you the magnetron that fits your radar. There are magnetrons designed for light marine radar applications to vessel traffic systems.
A new generation magnetrons is available
Besides the magnetrons shown below, there are new magnetrons developed: the Gen 4 magnetrons. GEN 4 offers the latest magnetron technology, not only to service new radars, but also to service older equipment. Read more about these GEN 4 magnetrons.
Which magnetrons are standard available?
See below for the magnetrons possibilities. There is a difference between:
1. Magnetrons for marine radar applications, they are ordered by frequency ranges:
3010 - 3090 mHz View
9345 - 9405 mHz View
9380 - 9440 mHz View
9415 - 9475 mHz View
9455 - 9680 mHz View
Gen 4 magnetrons
One of our key products are the new GEN 4 magnetrons.They are available in 4, 6 and 10kW and designed to meet new IMO requirements on spurious frequencies. GEN4 offers the latest magnetron technology, not only to service new radars, but also to service older equipment.
One model to fit them all The new GEN 4 magnetron can be installed in almost any radar using the same kW output because of its compact design.
If the footprint is different, you can use the simple adapter plate. The magnetron is so light that it can be fitted directly
on the circulator without additional support.
四代磁控管
第四代磁控管，共三个规格，分别是4kw ，6kw ，10kw ，设计满足了IMO 在伪频率上的要求。第四代磁控管采用了最新科技，不但满足新型雷达要求，同时也可以很好应用在旧型雷达上。
新的第四代磁控管，采用了兼容设计，能用在几乎所有相同输出功率的雷达上。可以加上简单的适配器，解决安装难题。新型磁控管非常轻巧而不需要任何支持可以直接和环形器对接。
Advantages GEN 4
Some of the advantages of the GEN 4 magnetrons are: Performance and application When choosing for a new generation magnetrons for radar systems, important issues are: the performance of the and how you can adapt this magnetron in your radar system. Read more Gen 4 magnetrons replacement chart Product number Replaces MG4004 MG5388, MG5388C, E3571, E3573, MAF1421B, MAF1561B Request an offer MG4004 with adapter plate A MG5248, MSF1421B Request an offer
MG4004 with adapter plate B MG5238A, 9M302, MG5243, MG5251, MRF1421B Request an offer MG4006 MG5389, E3560, MAF1422B, M1361 Request an offer MG4006 with adapter plate A MG5232, MG5232F, 9M502, E3540, MSF1422B Request an
offer Fully compatible with GEN 2 and GEN 3 magnetrons; Smaller outline than the outline of GEN 2 and GEN 3 magnetrons,
avoiding replacements that do not fit; Mostly a better performance of the GEN 4 magnetron when compared to the
original GEN 3 magnetron; No need to keep a wide range of models in stock, because one of each 4-, 6- or 10kW model can service almost every 4-, 6- or 10kW radar;Replaces almost any other magnetron with the same output, using adapter plate A or B.
优点
第四代磁控管和第二代和第三代产品完全兼容；
第四代磁控管外形比第二代和第三代产品小，避免了替代安装时尺寸不符难题；
第四代磁控管比第三代产品性能更优异；
配上匹配板（型号A/ 型号B ）可以替代任何相同输出功率的磁控管；
第四代磁控管（4 、6 、10kw ）可以应用在任何对应的4 、6 、10kw 的雷达上，这样可以保留所有型号的库存。
伪发射
开发新一代产品最主要原因为了满足ITU 关于带宽限制要求。EEV 成功开发的第四代产品不但满足了ITU 新的规定，而且不需要带任何额外的带宽过滤装置。然后调制调节器的设计也很重要，因为这个驱动磁控管，如果是设计很糟糕的调制调解器可能使即使是最好的磁控管产生带宽脉冲。到目前为止，测试的结果证明第四代产品性能非常优异。
匹配板
大多数雷达磁控管底座安装尺寸是第二代产品典型的113 毫米，这跟第三代尺寸一样，如Mg5241,Mg5424 。我们开发了两套匹配板，A 型（113 毫米）和B 型（115 毫米），安装在第四代的4 千瓦、6 千瓦、10 千瓦磁控管上，来替代相同长度的第二代和第三代产品。
这些匹配板表配有一套10 毫米的M4 螺丝和垫圈，把第四代产品固定好。同时有一套不同长度的螺丝和垫圈，确保安装时有适合尺寸。有了这些匹配板，第四代产品可以安装在任何4 千瓦、6 千瓦、10 千瓦的雷达上
